Raychem heat-tracing solutions are designed for installation wherever a process exists in pipes, tanks, or vessels for freeze protection or temperature maintenance in light or heavy industries. These solutions offers full control panel options.

FEATURED PRODUCT

INDUSTRIAL HEAT TRACE CABLE TECHNOLOGY

 

nVent’s industrial heat-trace line offers a wide selection of cables designed for freeze protection and process temperature maintenance. Different designs and cable materials allow for use in applications with temperature ratings up to 650°C. Ask your Brews Supply Sales Representative to learn more about nVent’s heat trace solutions available at Brews.

Featured Raychem Industrial Heat Tracing Products

E-100-L Lighted End Seal

The Raychem E-100-L kit is an above-insulation, lighted end seal kit for Raychem BTV, QTVR, XTV, KTV, or VPL industrial parallel heating cables used in tank heating applications. It is approved by FM, CSA and Sira for use in hazardous locations. The E-100-L is mounted on the pipe and projects through the thermal insulation and cladding for ease of maintenance.

DOWNLOAD THE PRODUCT SHEET

910 Series – Single Point Heat-Tracing Control System

The Raychem 910 is a compact, full-featured microprocessor-based single-point heat-trace controller. The 910 provides control and monitoring of electrical heat-tracing circuits for both freeze protection and temperature maintenance, and can be set to monitor and alarm for high and low temperature, high and low current, ground fault level, and voltage.

DOWNLOAD THE PRODUCT SHEET

920 Series – Dual Point Heat-Tracing Control System

The Raychem 920 is a compact, full-featured microprocessor-based dual-point heat trace controller. The 920 provides control and monitoring of two independent electrical heat-tracing circuits for both freeze protection and temperature maintenance, and can be set to monitor and alarm for high and low temperature, high and low current, ground fault level, and voltage on each of its control points.

DOWNLOAD THE PRODUCT SHEET

Stripping Tool

The Stripping -Tool-SR-Cable is a cable stripping tool without any exposed moving blades. The tool has a robust metallic body, ergonomic contour and replaceable blades. The scoring blades are protected by a spring loaded cap that rotates automatically. For safety, the cap rotates back to its original position automatically after the cutting operation is performed.

DOWNLOAD THE PRODUCT SHEET

High-Temperature Self-Regulating Heat Cables

The XTV family of Raychem self-regulating heat trace cables provide solutions for industrial pipe freeze protection and process temperature maintenance applications requiring high power output. Raychem XTV heat trace cable can withstand temperatures up to 482°F (250°C) and provide process temperature maintenance to 250°F (121°C)

DOWNLOAD THE PRODUCT SHEET

MI Insulated Heating Cables

Alloy 825 Mineral Insulated Heating Cables provide solutions for industrial freeze protection and process-temperature maintenance applications in hazardous and non-hazardous locations. This Thermal Management’s’ MI Technology is used where high power output, high exposure temperatures, or extreme resistance to environmental corrosives are needed. MI heating cables can provide up to 82 watts per foot (269 watts per meter) of power output with area classification and design approvals.

DOWNLOAD THE PRODUCT SHEET

HTPG Control Panel

The Raychem HTPG is a dedicated power-distribution, control, ground-fault protection, monitoring, and alarm panel for pipe freeze protection and broad process temperature maintenance heat tracing applications. This enclosure contains an assembled circuit-breaker panel board. Per national electrical codes and Pentair Thermal Management requirements, ground-fault protection must be provided for each heat tracing circuit. The Raychem HTPG panel is a cost-effective and convenient way to provide this protection. Panels are equipped with ground-fault circuit breakers with or without alarm contacts.

DOWNLOAD THE PRODUCT SHEET

NGC-40 Advanced Heat-Tracing Control System

The Raychem NGC-40 is a multipoint electronic control, monitoring and power distribution system with a unique single-point controller architecture for heat-tracing used in process temperature maintenance and freeze protection applications. By taking advantage of innovative modular packaging techniques, the Raychem NGC-40 system provides configuration and component flexibility so that it may be optimized for a customer’s specific needs.

DOWNLOAD THE PRODUCT SHEET

WinterGard

Raychem WinterGard Wet heat trace cable is a professional-grade, 6-watt/foot, self-regulating electric heating cable designed to provide pipe freeze protection and roof and gutter de-icing for residential and light commercial locations. The electric heating cable is constructed of nickel-copper bus wires, a self-regulating conductive core, an insulating jacket, a tinned-copper braid and an outer polyolefin jacket.

DOWNLOAD THE PRODUCT SHEET

TraceCalc Pro

TraceCalc Pro TM is a Windows desktop application that provides heat-tracing design calculations for heat management systems. It provides powerful features to help you obtain the best heat-tracing solution for your particular project utilizing world-class brands such as Raychem, Tracer and Pyrotenax. TraceCalc Pro also provides the user with important design data such as: pipe heat loss, number of circuits, electrical loads and maximum sheath temperatures.

Contact Brews Supply for pricing, information and promotions:

Enter Your Inquiry Here: