Caloritech™ Industrial Heaters

Caloritech™ Industrial Heating Products

Featured Caloritech™ Products 

	Caloritech™ GE Regular Duty Forced Air Unit Heater Caloritech™ GE Regular Duty Forced Air Unit Heaters are intended for use in regular duty industrial and commercial space heating applications. This heater is ideal for use in factories, warehouses, parking garages, boiler rooms, arenas, grandstands, mechanical rooms, shopping malls, display areas, commercial storefronts and more. This heater's robust design and top quality construction surpass the standards of most competitive models.
	CaloritechTM  PH Fan-Forced Enclosure Heaters CaloritechTM PH Fan-Forced Enclosure Heaters are designed to control the environment within enclosures by maintaining a stable temperature. The effects of low temperatures such as corrosion, freezing or condensation will adversely affect the components inside control panels. The Enclosure Heater will provide optimal performance environment for the critical components contained within the control panel.
	Caloritech™ PXFT Control Panel and Pump House Heater Caloritech™ PXFT Heaters are designed to maintain a suitable temperature inside a control enclosure, pump house or similar space. The standard unit is not suitable for use outdoors, unprotected from the weather.  All heaters come standard with a built-in thermostat (unless special ordered without). The PXFT uses a high surface area aluminum heat emitter to eliminate the need for a fan while providing low radiation and high convection heating to the enclosure.
	CaloritechTM CX Screwplug Heater Caloritech™ CX  Screwplug Heaters are designed for heating applications such as: water, oils, gases and mildly corrosive liquids. Standard designs with 1” to 2.5” are available with copper or incoloy® sheathed elements, with or without a built in thermostat. Caloritech™ CX Screwplug Heaters conform to API Bulletin 614, chapters 1 and 2, and are available with general purpose, moisture resistant or explosion-proof terminal housings. Custom built heaters are available in almost any rating up to 600V, with special sheath and plug materials.
	CaloritechTM MX Pipe-Insert Heater Caloritech™ MX Pipe-Insert Immersion Heaters are designed to provide uniformly distributed heat to storage vessels containing high viscosity liquids such as asphalt, molasses, tar, paint, glue, wax and oils without causing charring or coking. Units are installed in a suitable metal pipe contained inside the storage vessel (minimum 2" diameter), then heat is transferred safely from the heating element of the MX heater to the inner wall of the pipe by a combination of convection and radiation. This heater is a safe, cost-effective and virtually maintenance-free solution that eliminates the need for high maintenance pumps or open flames, which may present a fire hazard, especially when the liquid being heated is flammable.
	Caloritech™ TX Urn Heater  Caloritech™ TX Urn Heater is a bottom mount style immersion heater intended for use in liquid heating applications, such as steam tables, coffee urns, kettles, sterilizers, percolators and other water heating applications. Standard units feature a brass mounting flange and a copper sensing capillary with copper element sheath, however other materials such as incoloy® are available on special order.
	Caloritech™ AR  Industrial Thermostat AR thermostats are used in industrial applications where close control of process temperatures is not a requirement. All bulb and capillaries of AR thermostats are copper with nickel plating with the exception of the high temperature AR3769 and AR376893. These units have stainless bulb and capillaries. For corrosive applications a protective well or sleeving must be used. DPST controls with 3/8" diam. bulbs include a 3/8" NPT compression fitting, non-removable. For other controls without the built-in fittings, the CA1001 is available for field mounting if required.
	Caloritech™ Thermostats; Controls and Accessories Room thermostats are normally wall mounted to sense room ambient temperature. Various models are available: some can switch line voltage resistive loads up 600 VAC, some are designed for 24 VAC low voltage systems and others have 0-135 Ω proportional outputs for step controls and SCR’s. Remote bulb controls normally mount on ducts, tanks, boilers, ovens, etc. and are also available in models for line voltage or pilot duty switching and with proportional outputs.