Weidmuller ACT20M - The New Dimension for Converting
and Isolating Process Signals

The new ACT20M product line unites innovative technology with maximum functionality in an electronics housing that is only 6mm wide..

Weidmuller Industrial Electrical Connectivity

Featured Weidmuller Industrial Electrical Connectivity Products: 

	ACT20M The new ACT20M product line unites innovative technology with maximum functionality in an electronics housing that is only 6mm wide. Up to two channels per module help to save space in the electrical cabinet. High galvanic isolation of 2.5 kV and an accuracy of up to 0.05% strengthen the reliability and safety of the process. The product line includes passive isolators (1 or 2 channel), universal temperature converter, DC converter and signal splitter. Eight connections facilitate additional functionality such as signal splitting with sensor supply. The configuration is carried out via the DIP switch or the FDT/DTM software. The ACT20M modules are supplied via direct wiring or a DIN-rail bus.
	Industrial Ethernet WLAN Module Safe and versatile for integrating Ethernet devices into WLAN topologies Wireless communications are preferred when working with moveable applications or difficult to reach areas. Weidmuller’s versatile WLAN module can be used as an access point, bridge or client. It is quite simple to integrate into existing infrastructures because it has an alternative Power-over-Ethernet supply (using the data cable to run the power as well). Support for RADIUS services and WPA2 secure encryption guarantees that your data is fully protected. Multiple wireless zones can be set up so that clients can move with versatility by quick handovers between the different radio/wireless cells. Multiple zones can be specified (multiple SSIDs) and different VLANs can be assigned for each wireless cell. This allows you to implement a one-to-one forwarding of the cable based infrastructure to the wireless zone.
	WMF 2.5 (multi-functional) Terminal Series The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and ease of terminal installation are desired. The WMF 2.5 series is offered in configuration types including fuse, disconnect and feed-through with pluggable connectors. The WMF 2.5 terminals are 5 mm wide, providing a 20% space savings when compared to typical fuse terminals at 6-8 mm.
	ACT20X Signal Converters - NEW! These compact modules require only 11 mm per channel and take up very little space in the electrical cabinet. Specially designed for process automation applications in Ex and non-Ex zones, the ACT20X is a completely new line of signal converter products. The sixteen different variants can process all standard input signals including digital or analogue signals from Ex-zone field devices to the controller. The WI-Manager configuration allows you to configure all ACT20X products with your PC so that they can be custom-fit to a wide variety of process applications. It also enables you to analyze measurements and diagnostics data.
	ESX10-T: Class1, Division 2 Approved Electronic Circuit Protection type ESX10-T is designed to ensure selective disconnection of 24VDC load systems. Through selective disconnection the ESX10-T responds much faster to overload or short circuit conditions than the switch-mode power supply.
	MICROOPTO OPTO Modules  The MICROOPTO line of solid-state relays provides several options for switching and protecting signals. The line features pluggable cross connections and industrial standard marking options, all in a standard terminal block footprint of 6.1mm. By using opto-coupler technology, this line of devices will have a very long service life without failure or issues such as switching noise and contact bounce. These units are resistant to shock and vibration and, during operation, do not emit electromagnetic noise or switching related sparks. The MICROOPTO solid-state relays are CE and cULus approved
	Weidmuller T-Series Power Supplies  Weidmuller Industrial Electrical The T-SERIES is a new generation of high performance DIN-rail mounted single-phase power supplies designed to work reliably even under demanding factory floor conditions. A high power reserve guarantees reliable start-up of loads with high inrush currents. Excellent electrical specifications and high immunity against electrical disturbances makes these compact modules the best choice to power sensitive loads in industrial process control systems, machine tools or other demanding industrial applications. The T-SERIES offers users easy installation with detachable screw terminal block and snap-on mounting on DIN-rails.
	Weidmuller WAVE TTA: Universal Signal Conditioner Weidmuller announces the addition of a new module to their WAVESERIES line of analog signal conditioners – the WAVE TTA (Transmitter Trip Amplifier). This new module provides a unique degree of flexibility, functioning as a signal isolator, transmitter, converter, linearizer and trip amplifier, all in a single unit. The WAVE TTA offers users precision measurement accuracy to meet the diverse and demanding needs of the process industry. The TTA will function accurately over a wide ambient temperature range, and over a wide supply voltage range, and with most types of sensor inputs. For two wire current transmitters, 24 V DC power is provided. Alternatively the TTA can be a passive input for the current source. Most commonly used temperature sensors and DC inputs are accepted, and the TTA also allows the user to define specific characteristics, so special sensor types and linearization can easily be accommodated.
	Weidmuller ITX Plus - Configurable Loop-powered Signal Isolator This compact new signal conditioner provides complete electrical isolation and is ideal for control system applications with a mix of inputs. The ITXPlus can measure, filter and isolate different input parameters, then convert them into an industry standard 4-20mA output. With this unique capability and slim profile, ITXPlus offers savings on both I/O wiring and panel space.
	Weidmuller PRO-M Series Power Supplies Weidmuller’s new PRO-M Series Switchmode Power Supplies offer a host of advantages. Available in 10 different versions, the 24 VDC PRO-M power supplies all feature a solid ultra-slim metal housing, and are designed to mount on a DIN-rail with no ventilation gap required between multiple units. This feature provides up to a 50% savings in space and allows the PRO-M to fit into the tightest spaces in control cabinets or machines.
	Weidmuller MANN Series: Process Instruments With it's MANN SERIES, Weidmüller introduces a comprehensive range of innovative products for processing analog signals. The product series, ranging from simple dedicated units to complex microprocessor-controlled devices, can be used with almost all signal types and measurement sensors. The products also offer a variety of integrated functions, such as timing delays, adjustable threshold values and a programmable ramping function.